Metal Siding Painting Advice

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Window Shims
Stair Deck Head Out Problem

Exterior House Painting Projects - Remodeling Tips

Fixing up your house can be a fun and exciting time, as you decide on a new look for your home. Designing and planning home projects is both complicated and time consuming, but if done right the results are very rewarding for you and your family.

Exterior house painting is one of the quickest and most surefire ways you can change the look of your home. Painting it a different color or just mixing up the color schemes can give your house a fresh new look. Be sure to consult experts, or do your own research, when deciding on color schemes, as certain colors do not mesh well.

It is better to do this research prior to painting, so time and money is not wasted learning the hard way that certain colors clash too hard for your home. Exterior house painting is not Chinese algebra, but doing your homework never hurts.

Contractors' opinions are useful as well, as they have probably been in the business for some time and have experience with color schemes. Consulting a skilled contractor is a good idea before making a final decision on your exterior house painting choices.

Hiring a contractor is wise as well because of the time and headaches you will save while getting a professional job at the same time. Many people take home projects lightly and end up paying the price later, whether it is a monetary price or just the hassle that comes from disappointment in your decision. Taking some time for planning and design will probably help you to avoid these messes.

More information on College Works Painting exterior house painting for your home is just a click away.

Painting Contractor and Homeowner Survival List - San Deigo Home Tips

From a contractors stand point he or she must feel comfortable with the home owner(s) before entering into a contract before making the necessary improvements. This being said the homeowner(s) must know exactly what they want and the procedure that is going to get them to the final result of their project. Homeowner(s) do not like to be surprised in the way of unexpected disruptions to their environment. Furniture and pictures must come down or be covered up. Computers and tvs must be undone etc. Basically the room under improvement is going to be totally in disarray for a certain time period. It is up to the contractor to note this disruption to the homeowner(s) prior to commencement of the project.

As a home owner they must expect a certain amount of disruption to their living quarters so that the improvement will be done in the most professional way. For an entire room to be painted furniture no matter how large or small must be moved away from the walls. Cords, wires, and draperies etc. must come down until the project is complete. This is an uncomfortable situation to the homeowner(s) but it surely provides the contractor to perform the work professionally.

"DUST" can be a major challenge to both the contractor and homeowner(s). Where the contractor has patched and taped a hole or structural crack requires sanding. If the room contents are not well covered as well as entry ways into other rooms, there will be a "Dust Storm" that is time consuming for the contractor to clean up and a unprofessional situation that it happened in the first place. The homeowner(s) should make sure that the contractor takes every necessary precaution to protect the homeowners valuables from start to finish.

Getting the cheapest price by the homeowner is usually not a wise decision. The old adage "you get what you pay for" is true. If a contractor feels he or she is not getting the money they deserve they will cut corners on their workmanship and materials. Using a better grade of paints and materials should be spelled out in the beginning. This assure that the contractor does not use commercial grade paint when the homeowner(s) expect name brand quality.

Daniel Rowe owner of Rowes Painting and Carpentry Sayreville, NJ
http://www.rowespaintingandcarpentry.com

Tract Houses Framing Problems

The house you live in was probably a mass produced home built as part of a housing track. The track home is a rapidly built house in phases. These phases if possible will over lap the other home building trades. If possible you will have the plumbers working on the same house as the electricians and the framers. This is called fast tracking.

Fast tracking a house is building a home as fast as humanly possible. So you can imagine the pressures put on all of the people involved in building a track home.
The pace is so fast sometimes that I have seen job superintendents and foremen look like they were actually going to blow up. I mean explode from the pressure they where under.

Framing the stairs on the job was the same experience for me most of the time. Sometimes I had three jobs going at once. Think about it. At the most, I could only go to each of the jobs twice each week. That involved working on Saturday of course. This made a lot of framing foremen extremely upset. They had full time crews on their jobs always working five days a week. If I missed one day of work. I was behind for the rest of the job.

Now it rarely happened but if I did miss a day of work I had to make it up some how. The only way to make it up was by working late or on Sunday. Well most of the time I worked six days a week from 7:00 in the mourning until 5:00 at night. So working late meant sunrise to sunset. Oh did I mention that I did have a family. This wasn't easy for them either.

One time I got so far behind on a job that I was putting stairs in while they were roofing the houses. Talk about one unhappy foreman. I think you get the idea about the pressure I was under to install these stairs on time. My experience building stairs on track built homes taught me to build homes extremely fast while being proficient.
I'm not interested in working like that anymore. My life is simple now and I want to keep it that way. The next time you see a construction worker working late on a Saturday show some compassion. Maybe by reading this article you will understand some of the pressure he is under.

Building tract homes is hard on you mentally and physically.

Happy Home building.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stairway Safety

Deck Building Books

Window Header Framing Problems - Building Problems

As a building contractor it is my job to assemble the house to meet the specifications from the architect and the structural engineer. I do this by looking at the building plans and installing the specified lumber sizes. I can take it upon myself to install a larger size wood beam or window header adding an additional cost to the job of course. I don't think so.

It's not uncommon for a framing contractor that has an additional 5 foot scrap piece of 4 x 8 left over that he now has no use for. He can then choose to use the 4 x 8 instead of a 4 x 6 for the window header. This type of building is common and acceptable.

If the structural engineer calls out for 4 x 6 window and door headers do not take it upon yourself to replace the 4 x 6 with a 4 x 4. I have seen too many framing contractors or carpenters make an on-the-job judgment like this.

A good example would be a single story house with 2 foot wide windows that require a 4 x 6 window header. As the carpenter builds homes over the years he can come to his own conclusion that a 4x4 will work fine for this application. Again keep this in mind as a framing contractor and a carpenter you are assembling the home not designing it.

Do not change the sizes of any headers or beams.

A long time ago carpenters used a standard rule of thumb, you could go up two sizes larger than the window opening for your header. Let me give you an example of what I'm trying to explain.

A 4 foot wide window opening would require a 4 x 6 window header. A 6 foot window opening would require a 4 x 8 window header. This should give you an idea of what I mean by going up two sizes larger than the window opening to figure out the lumber necessary to use for your window header.

This rule of thumb does not necessarily apply in today's building industry. The reason for this is structural changes from earthquake damage. The structural requirements that are required for building a home require a lot more metal bracing and strapping. Therefore some of the lumber requirements for beam sizes and window headers will be different.

This message is for general contractors, framing contractors and carpenters. When installing a window header and you take it upon yourself to change the size you also assume the responsibility if the building fails. This type of mistake is common and you guys know what I'm talking about.

It's not worth it. Keep in mind you are the assembler and not the designer of the building you are working on.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and House Framing Structural Repairs

Floor Framing Ventilation

Common Mistakes With Faux Finishes - House Remodeling Ideas

The elements of faux painting aren't difficult but there's always room for error here and there. Keep these important tips in mind and you're half way there.

1. Your end result is only going to be as good as your materials. That applies to paint and brush quality but above all to your surface. Think of it as your canvas. You're about as likely to achieve your aims on a surface coated with flat paint as you would be painting on tissue paper.

Eggshell or satin base paint is the best undercoat. Faux finishes don't work as well on flat paint surfaces. Paint also needs to dry slowly and flat finishes tend to dry quickly and the scope for fixing mistakes is limited. Finally, underlying flat paint just seems to dull finishes.

2. A few cents of commonsense is worth dollars of equipment. Don't bother with unnecessary gimmicks. Spend your money on quality paints and brushes instead. You don't need a special sponge applicator - almost any soft sponge will do. You don't need an artist's palette. Ice cube trays are cheap and actually hold more paint.

Don't waste that paint! You can always stick it in the freezer rather than letting it harden. Another money-saving tip is to use dishwashing liquid for cleaning brushes. You can buy fancy cleaners but a grease-cutting dishwashing liquid works just fine with water-based paints and with stencil creams, which are partially oil-based.

3. If your surface is pitted or cracked, it will need filling, and sanding when dry. A common error is to assume that that once your faux finish is completed your job is done. Wrong! You MUST seal with water-based sealer before painting, or your wall will look blotchy and diseased. Seal with a color that blends in with the rest of the wall or patches will show through. If you don't have that original paint, mix the sealer with suitably colored acrylic paint to minimize the contrast.

4. You know the saying: oil and water don't mix. Remember that when painting or suffer the consequences. The resulting curdled slush is not pretty. In short, know your paints and read your labels. Latex paint may sound like it's oil-based but it's part-water.

5. Not only is it true that mess is stress, but lack of cleanliness will foul up your finish. You need to clean brushes really well if you don't want previously used colors contaminating your handiwork. Running water and finger massage won't clean properly. That doesn't mean you need expensive professional cleaning pads. Check the kids' department: you can find cleaning pads there at a fraction of the price.

You need to maintain a clean working environment, especially when working for others. Small splashes on carpets can be handled without chemicals. Try nail scissors. Wait until the paint is dry. Adding water just spreads it. Then snip the soiled ends, strand by strand. This won't work on larger patches, so make sure you use drop cloths as a preventative measure. For disasters that can't be trimmed out, try product called Goof Off.

6. When using glazes, wet is the watchword! You need to finish in one seamless session. That means no bathroom breaks (so go before you start!) or refreshment interludes. Wet and dry edges won't mix, the dry glaze won't spread and it will show. Work fast, especially in hot dry climates.

7. You may not recognize your painting style, but everyone has their own unique technique. That's why collaborative efforts don't work. People can work together as long as they work on different layers or walls, not different sections of the same layer/wall. Your style can even change during a day: pre- and post-lunch. Plan your sessions and breaks to maximize uniformity in technique.

Ready to start your faux finish painting project? Get the designer walls that would make even "Martha" jealous! Claim your free "Insider's Guide to Faux Painting" and avoid all the common mistakes, get success tips, find the right products for the job and more.

Common Mistakes With Faux Finishes - House Remodeling Ideas

The elements of faux painting aren't difficult but there's always room for error here and there. Keep these important tips in mind and you're half way there.

1. Your end result is only going to be as good as your materials. That applies to paint and brush quality but above all to your surface. Think of it as your canvas. You're about as likely to achieve your aims on a surface coated with flat paint as you would be painting on tissue paper.

Eggshell or satin base paint is the best undercoat. Faux finishes don't work as well on flat paint surfaces. Paint also needs to dry slowly and flat finishes tend to dry quickly and the scope for fixing mistakes is limited. Finally, underlying flat paint just seems to dull finishes.

2. A few cents of commonsense is worth dollars of equipment. Don't bother with unnecessary gimmicks. Spend your money on quality paints and brushes instead. You don't need a special sponge applicator - almost any soft sponge will do. You don't need an artist's palette. Ice cube trays are cheap and actually hold more paint.

Don't waste that paint! You can always stick it in the freezer rather than letting it harden. Another money-saving tip is to use dishwashing liquid for cleaning brushes. You can buy fancy cleaners but a grease-cutting dishwashing liquid works just fine with water-based paints and with stencil creams, which are partially oil-based.

3. If your surface is pitted or cracked, it will need filling, and sanding when dry. A common error is to assume that that once your faux finish is completed your job is done. Wrong! You MUST seal with water-based sealer before painting, or your wall will look blotchy and diseased. Seal with a color that blends in with the rest of the wall or patches will show through. If you don't have that original paint, mix the sealer with suitably colored acrylic paint to minimize the contrast.

4. You know the saying: oil and water don't mix. Remember that when painting or suffer the consequences. The resulting curdled slush is not pretty. In short, know your paints and read your labels. Latex paint may sound like it's oil-based but it's part-water.

5. Not only is it true that mess is stress, but lack of cleanliness will foul up your finish. You need to clean brushes really well if you don't want previously used colors contaminating your handiwork. Running water and finger massage won't clean properly. That doesn't mean you need expensive professional cleaning pads. Check the kids' department: you can find cleaning pads there at a fraction of the price.

You need to maintain a clean working environment, especially when working for others. Small splashes on carpets can be handled without chemicals. Try nail scissors. Wait until the paint is dry. Adding water just spreads it. Then snip the soiled ends, strand by strand. This won't work on larger patches, so make sure you use drop cloths as a preventative measure. For disasters that can't be trimmed out, try product called Goof Off.

6. When using glazes, wet is the watchword! You need to finish in one seamless session. That means no bathroom breaks (so go before you start!) or refreshment interludes. Wet and dry edges won't mix, the dry glaze won't spread and it will show. Work fast, especially in hot dry climates.

7. You may not recognize your painting style, but everyone has their own unique technique. That's why collaborative efforts don't work. People can work together as long as they work on different layers or walls, not different sections of the same layer/wall. Your style can even change during a day: pre- and post-lunch. Plan your sessions and breaks to maximize uniformity in technique.

Ready to start your faux finish painting project? Get the designer walls that would make even "Martha" jealous! Claim your free "Insider's Guide to Faux Painting" and avoid all the common mistakes, get success tips, find the right products for the job and more.

Easy Bathroom Remodeling Solutions

Here's a list of problems that contractors run into when designing, planning, and remodeling bathrooms. These bathroom remodeling solutions listed below, often create problems for homeowners as well as contractors. Some of these problems have created contract disputes and could have been solved if the contractor or a homeowner was informed properly.

1. Problems with Old Galvanized Water Pipes: This is one of the biggest problems with older homes. Metal rusts and water running through these metal pipes will speed this process up, considerably. The problem arises when the galvanized water supply pipes cannot be taken apart or unthreaded, to add new plumbing fixtures or pipes, during the bathroom remodel.

Solution to the Problem: Experience contractors should inform their clients, about problems like this and what they propose to do, if they run into a situation where the galvanized water pipes are badly damaged. There will usually be extra work, which leads to extra money and this could create a problem between the contractor and a homeowner.

2. Problems with cast-iron drainpipes: these pipes often rust or become separated at the joints, creating water leaks and even areas for tree roots to enter the drainage system. These tree roots of course will cause the drainpipes to clog and eventually will have to be cleared in order for the drainage system to work properly.

Solution to the problem: informed the home owner of problems with cast-iron plumbing. If the contractor explains to the homeowner, any problems that could arise and a solution, you will find the process of bathroom remodeling a little less stressful. This stress can be eliminated or the contractor and a homeowner with a little preparation.

If you're a remodeling contractor, it wouldn't be a bad idea to make out a list of potential problems for the homeowner. List as many of the problems as you can think of, that you have ran into in the past or have heard other contractors and homeowners talking about. These lists can be given to your clients when you sign the contract.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet

Valley Center Remodeling

Bathroom Moisture Problems - Home Remodeling

Right above my bathtub in my master bathroom the paint is peeling off the wall. The area is peeling above the tile in my bathtub and shower combination. I tried to glue the peeling paint back and only made the situation worst.

First things first. The paint is peeling because there is to much moisture in the bathroom while you are using it. Do you have any windows you can open or a ventilating bathroom fan. If you have a window crack it open part way while you are showering.

The water droplets will accumulate on the walls and drip into any cracks. Right above the tile grout is a great place for moisture to accumulate. Oh yeah moisture loves grout and drywall. If you have any unpainted areas or an area that has cracked. Guess what you have now.

Your paint is peeling because the bathroom gets hot and cold. Moist and dry. If you have the door and windows shut. You just created a moisture trap. Most people prefer their privacy and will closes the door when using the shower. Well then open the window and let some cold air in while you are taking a nice warn shower. I don't think so. Most showering fools don't like that idea either.

Ok one more idea keep the windows shut so you don't let the cold air in. Then lock the door so no on barges in on you. If you have a ventilation fan turn it on. This will at least pull fresh air in from under the door and send the moist air out of the house.

But the fan is so noisy and I can't enjoy my nice warm vapor producing shower that will eventually cause me to get sick from mold particles floating around in the air while I am using my bathroom.
Does this about sum it up for you and don't we all do this from time to time. We want to enjoy our shower time, so we close up everything and when we are in our bath sauna environment relaxing our house is getting some damaging moisture that could cause mold and mildew.

Open a window or door a little when you shower. Get some air circulating through the bathroom and prevent damage to your nice house.

Put up with a little inconvenience for you homes sake and your pocket book.

Greg Vanden Berge has been in the home building and remodeling business in California for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website provides all kinds of answers to remodeling and new house building in North San Diego Home Remodeling Carlsbad Home Remodeling

Visit us now for Bathroom Ideas

Front Porch

Cost Plan For a Sunroom

According to National Association of the Remodeling Industry (NARI) price of sunroom ranges from $12,000 - $70,000. NARI estimates that the sunrooms can save up to 70% of the investment cost. The cost that is incurred in the construction of a sunroom includes the material cost and the labor cost. It has been projected that on average the material of a sunroom may cost up to $10,400. Constructing the deck, may require approximately $1500 of material. For the construction of the stairs the estimate material cost can be near to $270 figure. Construction of roofing system, floor improvements and all other material costs for the construction of an average sunroom can be very near to $13,500 - $14,000.

The second main aspect that should be considered while chalking out the cost of sunroom is the labor cost. For the construction of an average sunroom the labor charges can exceed $11,000 figure. For the construction of the deck, the labor cost is estimated to be around $1650. Likewise, construction of the stairs may cost from $200 to $250.

If we merge these costs with the flooring, roofing system and the total labor cost which is not less than $12,000 we can get a big figure of around $25,000. So it is obvious that only the construction of an entire sunroom can cost up to $25000. It is commonly seen that the sunroom prices can vary because of the material used in the construction work.

Many people like the aluminum work for their sunrooms and it is also widely accepted material for sunrooms construction because it makes the sunroom very beautiful. But on the other side many people also use wooden material in the construction of the sunrooms which may reduce the beauty of the sunroom as compared to the aluminum work. An aluminum sunroom can be constructed with energy proficient exterior and interior with panes that are thermally broken. A sunroom with wooden panels can also be constructed with beams that can give your sunroom a classic touch. Sunrooms that are covered with vinyl shell are commonly used in the building of the Victorian and Georgian Art schools.

The type of fixture that is used in the sunroom can increase its total cost. The types of windows and doors that are planned to be fitted are the main factors that may increase the costs. Sliding doors with dual locking system can also be fitted that are widely used because of childproof handles. The style of the sunroom also plays an important role in increasing the cost or reducing it. There are various roof designs that are introduced for sunrooms; include cathedral, straight, curved and conservatory. The roofs of sunrooms are normally made-up of aluminum with a coating that helps in restricting the injurious ultra violet rays of the sun from entering in the room. Aluminum costs are surely more than vinyl but vinyl provides more insulation that does the aluminum. If you are building a wooden sunroom then keep in mind that it can cost very much to you because it requires the proper maintenance and care. Make sure to build a budget for this project before you select designs for your sunroom.

Andrew Caxton is a freelance writer. Learn more about sunroom addition and patio enclosures at http://www.allsunrooms.com/enclosures.html

Get Rid of Ants in Your House

For most homeowners, ants can represent a serious problem. While there are many commercial products out there that promise to help you get rid of them, there are more naturals ways that are cheaper and healthier. Follows these steps and ants will vanish.

1. Locate the place where the ants are entering the house. You can do this if you follow their trails.
2. Buy Diatomaceous earth at your local hardware store and apply it to the holes or cracks where the ants enter. If you have trouble finding it, get baby powder as some contain this material. Check back regularly and if they're still there, apply some more. Ants will not get close to this place, because they almost immediately die if they touch it.
3. You can get rid of the remaining ants by spraying baby powder mixed with water on them. Make sure you sweep the floor after you do this.
4. For a more animal friendly way of getting rid of ants, try to spray them with a peppermint essential oil / water mix. You can also soak a long piece of string in peppers or cinnamon and put it around your home.
5. Consider planting mint plants along your house. Not only it's useful for other things and gives a nice smell, but it t will keep the ants out forever.
6. Keep your house clean. If you do your dishes regularly, mop the floor and wipe the kitchen tables every day, there won't be any reason for ants to enter, as they're looking for leftover foods and sugar.

Jay Banks has been an accomplished realtor in Vancouver BC for several years. For more information and other great tips, visit his website http://www.jaybanks.ca

S Tile Roof

Add Value to Your Home - Home Tips

Basement bathrooms are possible, but be prepared for a sizable project.

Basement bathrooms can be installed in the same manner as any other bathroom with a few wrinkles. Since there are no windows, although an exhaust fan is usually a good idea to handle the moisture and special arrangement may be needed if your basement bathroom is below the level of the utility lines.

Basement bathrooms can be a real pain in the neck without the proper insulation. Let's just say that the toilets can get really cold! Basement bathrooms are possible, but be prepared for a sizable project. Basement bathrooms tend to be large, busy places with a dozen or more stalls and no place for your partner to hide. Bathrooms on upper floors tend to have less traffic. Basement bathrooms can be a real source of mold and mildew buildup. Clean the bathroom regularly and properly ventilate the room so the moisture doesn't have a chance to collect.

Suspended tile basement ceilings are easier to install, surprisingly cost-effective, and their removable tiles allow continued access to HVAC ducts, plumbing and wiring. Easy access to these important systems in your basement ceiling will be important over the years. A suspended ceiling is another option, especially if you need access to shut offs such as gas and water valves and if you can install this under pipes and have your 763 finish height.

A bathroom wall that won't encourage mold and mildew, or be damaged by condensation, is hard. Because concrete in contact with the ground is always cool, it can become a condensing surface for water vapor in the warm air escaping from a finished basement bathroom.

Installing tiles is a long, tedious, and involved project. After installation, they will need to sit for at least two days without being used in order to seal correctly on to the floor. Installing a basement bathroom is a great idea, and it pays back for itself by 80% or more when the home is sold.

DiCicco Building Company has been a Macomb Township Home Remodeling Contractor for over 20 years. We are also leaders in Bathroom Remodeling along with being an award winning custom residential home builder. We also specialize in Finished Basements and home additions.

Wood Stair Cleats Problems - Stairway Remodeling

I would imagine most people don't even know what it wood stair cleat is, in construction we have so many words that describe the same thing. A stair cleat is another word for a thread bracket. In other words it's the part of the stairway that connects the stair stringer to the stair step. These have been used for years and over time, most of them will develop the same problem.

Most wood stair cleats loosened up and create a safety hazard. If the stairs are located outside in extreme weather conditions, for example, if it rains or snows a lot, extremely humid humid weather, or extremely hot and dry temperatures, your staircase might not last that long, if it is or isn't maintained properly. It's not a bad idea to use steel or concrete for stairways in these climates.

If you're ever walking up a set of stairs with wood cleats and the stair steps feel a little loose or wiggly, make sure you examined the stair cleats for safety. It's not uncommon for someone to be walking up or down a set of wood stairs and having the stair step or tread giveaway because the wood cleats has loosened.

If the wood stair cleats are nailed to the stair stringer, the nails can loosen up, causing it to become loose, as you walk up and down the stairs applying pressure to the stair cleat, this will create movement in between the stair step and the stair stringer. This could cause the cleat to crack, break and separate the connection between the stair step in the stair stringer.

I would suggest using metal brackets instead of wood cleats. The metal brackets will not crack or disintegrate like some wood cleats. Stair building brackets of course can loosen up and should be maintained regularly.

If you decide to use wood stair cleats, I would suggest using screws instead of nails and drilling holes in the wood stair cleats, most of the time this will prevent cracking the cleat. Try to use a thicker material for the stair cleat, for example using a 2 x 4 with lag screws and washers would be better than using a 1 x 4 with nails.

If you're walking up a set of stairs and a stair step feels loose, contact the owner of the property and let them know, they have a problem with their staircase.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more stair building books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Tub Diverter Mold Problem

Choosing Types Of House Windows

A very important part of every house is the fenestration, which means the selection, size, and arrangement of the types of house windows. Windows do much for the exterior appearance of a house and can make a room livable or intolerable, depending on where they are placed and how they operate.

There are three general types of windows: those that slide up and down, those that slide sidewise, and those, called casements, that are hinged at the side and swing out or in.

The ancient and honorable double-hung windows that slide up and down have many things in their favor. They are weather tight, if properly installed, they operate easily, and they are not expensive. The ones that are fitted with weights and cords that run over ball-bearing pulleys are the most satisfactory.

So-called sash balances of various kinds are on the market, which seem to work rather well, especially when they are new; these work on the principle of winding and unwinding a spring. Be sure the windows are sufficiently counterbalanced in some way so that they operate freely and easily.

The types of house windows that slide horizontally are at the moment more in favor, perhaps because these new aluminum windows lend themselves particularly well to the modern house. If they move on nylon rollers they seem to be rather satisfactory; but they are not as windproof or dustproof as the double-hung wood windows.

The fact that the aluminum does not require painting partially offsets the slight additional cost. If you consider the repeated paintings that wood windows will require, the aluminum will be cheaper in the long run.

Many people feel that the metal windows go particularly well with modern type houses and fear that the wood looks out-of-date. This is largely a matter of opinion.

In a very cold country the wood is less liable to collect frost on the inside, as the metal is a very good conductor of heat, and will conduct heat rapidly to the outdoors on a cold night and may collect considerable frost on the inside from moisture condensed from the warmer air of the room,

Much depends on the taste of the home owner, either of these two types of house windows will last as long as other parts of the building. If you like one kind, use it. The size and placement of the windows is more important than the material of the frame.

Glass blocks can be used to let in light and for decorative purposes, but they do not help with the ventilation of a room, which must be provided in some way for every room.

If the bathroom window can be fitted with a piece of glass that is translucent, but has a surface texture that does not transmit an image, it will save a lot of curtaining, which is often in the way in a bathroom. This glass is known as rolled glass, hammered glass, or obscure glass, and is not too expensive in the simpler patterns.

Casement Windows

Windows that swing in or out have a few advantages, but they tend to be in the way. Those that swing out are easier to make weatherproof, and are usually less in the way than those that swing in. When you hinge a window at the side or at the top and can open it wide, you getthe full size of the opening for fresh air, but when you open a sliding window you get only half the opening for air circulation.

If a window is mostly for ventilation, then the casement (hinged) type will be more effective. But casement windows are not noted for their tight fit and ability to exclude dust, water, or cold. Although weather stripping often is helpful in making them tighter, it can also make them more difficult to operate.

Well-chosen types of house windows will greatly enhance the beauty of your home.

Curious About Home Improvement Costs?

I've Got Loads Of Expert Advice And Useful Tips To Help You With Your Home.

Click Here For Great Ideas: http://www.houseblueprint.net/

Bathroom Contractor Safety - Remodeling Contractors

This article isn't about contractors using the bathrooms safely, it's about contractors working on someone's house, remodeling a bathroom. When working on any part of the home, a contractor and his workers should think and work safely on any project, but working in a bathroom with more than one person can become a contractors safety nightmare.

I was working in a kitchen one time, with 11 workers. I finally couldn't take it anymore and left the job. This did not make the general contractor very happy but it saved me from getting into a fight with one of the other workers. Whenever you're working in a confined area like a kitchen, bathroom, crawlspace or attic, safety is going to be a priority and should not be overlooked, because someone else wants to get the job done two days sooner.

Most accidents happen working in confined areas because of poor time management or someone else is in a hurry. Whenever you start to speed the destruction or assembling of any part in the house, you're increasing the risk of an accident. Most accidents happen from people in a hurry or poor planning.

As a bathroom remodeling contractor, you should plan properly and only use the minimum amount of people necessary to work in confined areas. If you are tiling the bath tub surround, one to two people is more than enough. If you're tearing the bathroom apart, during the demolition process, a maximum of three people should be used. During the demolition process, make sure your workers are thinking safely and clearly. Ripping a large piece of plaster off of the wall, that has wall anchors in it could grab a hold of something like an electrical wire or plumbing pipe. This of course could cause damage to the home, as well as a risk of electrocution.

Use your head when working in the bathroom and you will greatly reduce the possibility of any accidents. Accidents can easily be prevented my working cautiously on anything.

Bathroom Remodeling Contractor

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet

How to Maintain Home Humidifiers For Their Long Life

Are you worried about the care and maintenance required to keep your humidifiers in good condition? The good news is that this maintenance isn't as difficult as it sounds. These easy to follow steps will help keep your humidifier in tip-top condition with no need to call on professional assistance. Remember, you must not neglect the cleaning of these electronic devices as it definitely affects their performance.

Understand the Instructions By The Manufacturer

Most importantly you must have the clear understanding of the instructions provided by the manufacturer of your room humidifier. If you are not able to understand any particular instruction you must not hesitate to contact the people concerned. Also, remember that warm mist humidifiers might follow different instruction than a cool mist humidifier.

Taking Care of Filters

It doesn't matter whether you possess a furnace humidifier or an ultrasonic humidifier, the filters installed in your humidifier must be protected from any damage. The filters must be removed, replaced if damaged, or washed properly before reinstalling them. Make sure that filters are dried before you reinstall them.

Using Right Disinfectants

The products used for washing and cleaning the humidifiers are available in the form of disinfectants. Choose products which are capable of restricting the growth of germs and microorganisms like moulds and bacteria in the humidifier. Vinegar, specifically the white vinegar, is recommended for thorough cleaning of the humidifier reservoirs. It is helpful in removing undesirable deposits from the humidifier.

A Few Precautions to Follow

* Make sure that the device is unplugged while cleaning it.

* The portable humidifier must be carried with care, saving it from unnecessary wear and tear.

* Use gloves and other safety products while cleaning the reservoirs and other parts of the humidifier.

* When the device is not in use you must uninstall it carefully and store it properly.

* Don't forget to wash various parts with disinfectant before storing it and also when you reinstall it again.

* Look out for any parts that begin to rust and make appropriate efforts to clean these or replace them with a new part.

It is also recommended to get your room humidifier or whole house humidifier examined by experts after long periods of usage. This will prevent undesirable situations occurring because of lack of technical knowledge.

In order to get full value your money you must be ready to take care of and maintain the house humidifier. These devices are designed for your comfort and thus must not be neglected as it may lead to growth of microorganisms or damage of various components of these humidifiers.

The products and information offered at http://www.humidifierinformation.com/ is of great value for investing your money in the right kind of humidifier. You can visit the website to learn about popular humidifier brands and guide your decision for right product.

Roach Exterminator Tips

Roaches are one of the oldest and most primitive insects, surviving millions of years of evolutionary changes. It's no surprise that humans find their fetid odor and destructiveness offensive. Roaches are omnivorous nocturnal insects who hide during daylight hours and feed at night.

They can be found in damp, wet places such as under kitchen and bathroom cabinets, under floors and inside walls. Some have even been known to crawl into ceiling lights such is their ability to access a hiding and breeding place. Most homeowners are appalled to find roach infestation in their homes. For commercial buildings, roaches crawling into personal belongings under desks and in supply cabinets, closets and storerooms exacerbates the problem of infestation.

Generally, the "Do-It-Yourself" homeowner will attempt to exterminate roaches through the use of roach sprays, powders and pastes. The difficulty here is reaching areas with these methods that are hidden and fully infested. Also, there are several other problems that should be addressed: whether these applications are hazardous to humans and pets and long-term contamination from chemicals used for extermination. After several failed attempts, a homeowner may choose a professional exterminator.

Choose a professional exterminator with as much care as you would any residential service representative. Select a company with good business credentials. Check to insure that each exterminator is licensed by a state regulatory agency as well as a business association. This will prevent less experienced individuals from endangering your home to unnecessary exposure to extermination methods that can be harmful to your family's health.

A good exterminator will usually require a quarantine period for extreme or prolonged infestation. This will entail evacuation from the premises for a period of 24 to 48 hours, depending on the infestation problem. If infestation problems are limited, a few hours evacuation may be all that is necessary, followed by a full and complete airing of the premises, just as you would for interior painting or floor sanding.

Most exterminators will provide a complete list of follow-up actions by inhabitants to avoid unnecessary contact with contaminants. Usually, one application by a professional exterminator is all that is required for less resistant infestation. However, most exterminators will provide a second application usually at half the cost or often, free of charge.

Obviously, following the advice of your professional exterminator with regard to roach damage is critical to avoid serious structural problems. As well, your professional exterminator may make recommendations as to correcting possible future infestation such as maintaining plumbing so that moisture is reduced; thereby reducing the fertile environment for roach breeding. Roaches tend to breed egg sacs in dampness. But, certain types of roaches often breed live offspring.

Most helpful is to avoid contact with places that tend to breed these insects and maintaining a home that doesn't invite roach proliferation.

David Wilson is the man behind the Roach Exterminator guide, a site devoted to helping you learn how to kill roaches and more.

Yellow Water in the Tub

The problem I am describing here is most common in a large bathtub, such as a whirlpool. Basically, the larger the reservoir being filled with water, the more prominent the discolored water will be. I have, over the years, seen a number of tubs that, after they were filled, had water that was so yellow (or brown) that it looked like "flushing" was in order. In fact, one month I had three tubs in a row like this. I do not see this condition very often so that was unusual. This condition may be be disconcerting to those buying a home and, actually, it can indicate a bigger problem with the plumbing system than what might, at first, be anticipated. Further analysis by a plumber is in order.

Even for an inspector, yellow or brown water in a tub is startling. It is not appealing to crawl into that environment for a refreshing bath. What causes this yellow color in the water? Well, even a yellow tint is probably caused by iron, corrosion or rust forming in the system. It could be an iron fitting somewhere, iron pipes, corrosion in the main underground water line into the home or it could be a failing hot water heater with a rusted liner. For sure, an inspector would look for old galvanized pipes. Realistically, an inspector probably cannot pinpoint the cause of this discoloration, but it is related to iron, rust and it is a problem. Call the plumber.

A buyer needs to be alerted to this concern as repairs could me minor, or costly, and the buyer might be concerned enough that he or she wants the issue fully resolved prior to closing.

Steven L. Smith, owner of King of the House, Inc home inspection is a licensed structural pest inspector and a certified home inspector in Bellingham WA. He has been appointed by the Governor to sit on the State Home Inspector Licensing Board. Smith is the program coordinator for the college level home inspection training program at Bellingham Technical College.

http://www.kingofthehouse.com

Wood Scaffolding

Finding Grants for Green Construction

When it comes to new construction techniques, grants are often a way to cut costs. Federal grants for green construction are plentiful with billions literally available.

A federal grant is an award of financial assistance from a Federal agency. It is intended to carry out a public purpose or support or stimulate a purpose that is authorized by a law of the United States. Federal grants can be found and applied for electronically. The site Grants.gov is the central clearing house for Federal Grants.

There are twenty six different agencies that offer over 1,000 grant programs. The grants that apply to green construction are mostly offered by the U.S. Department of Health and Human Services. The total amount of grants available exceeds $400 billion dollars. The grants offered by the feds fall into twenty one categories. The categories that have the most impact on green construction are Energy, Environmental Quality, and Health.

Most of the grants are directed toward specific geographical areas. Some of the major concerns of the grants include water quality improvement and the prevention of urban storm water runoff. Many of the grants are connected with the Leeds certification program. Leeds stands for Leadership in Energy and Environmental Design. It is a program that is run by the United States Green Building Council and it establishes green construction standards and awards certificates to those that maintain these standards.

Although there are federal grants available, it is on the state and local level that the large majority of grants can be found. The green movement is a grassroots type of thing that appears to be strongest at the local level. Environmental concerns are often very local, and the problems that have been caused by the neglect of the environment are local as well. The pollution of waterways is a good example of this. grant programs exist that are directed at the Great Lakes or at Puget Sound, for example. States that are bordering these waterways usually offers these grants. The idea of environmental impact areas has led to the localities that border or are inside the impact area being the best source of funds for projects that will address the problems.

Private foundations like the Kresage Foundation are among the best sources of green construction grants. The Kresage Foundation has been offering grants under their Green Building Initiative Program. It is specifically geared toward the area of planning and design. While it is true that State, local, and private foundations are the major sources of grants that can be considered pure green building, the federal government is also a source. Research is the key to finding a grant for your project, so take the time to explore the various options mentioned above.

Zack Verde is with GreenBuildingCompanies.com - providing green building articles.

House Framing

Should You Cancel Your Home Building Insurance?

Only if you are going to take out alternative cover!

It is very risky not having home building insurance. There are two main reasons. Firstly, if you have a mortgage you have to have it. Secondly, you will have to be pretty well off to be able to re-build the house in the event of a catastrophe. Don't forget, nobody thinks it will happen to them.

What does buildings insurance cover?

So, what do you get for your hard earned cash? Hopefully, just piece of mind, and it is money down the drain. Most people aren't sure what is covered by home buildings insurance and what is covered by home contents insurance. Here is a summary but remember, it varies with different insurers and it is wise to check with the insurer or better still use a broker who knows what he is talking about.

Home buildings insurance covers the main structure of your home, the garage, and outbuildings, (although sometimes only if they are listed in the deeds), for the cost of rebuilding. Usually so is everything else; walls, paths, drives, patios, terraces, fences, hedges, and gates - even tennis courts, swimming pools and ornamental ponds, but watch out for exclusions as they can be difficult to spot in the small print. Many people now have solar panels and wind turbines, they're usually covered too, as are your fixtures and fittings. Inside the house a good rule of thumb is: If you turn the house upside down and it stays put, it's covered under the home buildings insurance.

Other things to look out for:

Some providers need a re-build cost of the property, others use a notional cost of say between 300,000 - 500,000, which is usually adequate, and others use an unlimited amount. Don't be fooled into thinking unlimited is best, that doesn't mean they will give you a blank cheque!

• Some charge extra for monthly Direct Debit others don't.
• You often will get up to 20,000 for alternative accommodation.
• You would usually get cover for fire, storm and flood damage.
• Cover for subsidence or heave of the land your property stands on. (Normally there is a 1,000 excess for this).
• You get a no claims discount, if you don't claim. Always think carefully before making a small claim, after the excess and increased premiums the following year may cancel it out or even make you worse off.
• You can often get an additional discount on buildings and contents insurance if you buy them together.
• It also covers any permanent fixtures in your home like built-in wardrobes, kitchen surfaces, taps, basins, baths and showers.
• If your house was built before 1800, is not of "Standard construction" (i.e. brick walls and a tiled roof) or is listed then you will need special advice and insurers as normal insurers won't touch them.

What causes the damage? You are usually covered for the following conditions:

• Fire, smoke, explosion, lightning or earthquake.
• Riots, civil commotion, labour and political disturbances or strikes.
• Malicious damage or vandalism.
• Storm or flood (If you have claimed for flood damage, don't cancel, you may find it difficult to get covered again).
• Impact or collision.
• Escape of water or oil.
• Theft or attempted theft

If the property is going to be unoccupied for more than 30 days then check with your insurer as it increases their risk. Wet or Dry rot is not covered. Pollution from outside sources is unlikely to be covered. If you are doing structural work to your property then check the builder has insurance, your home building insurance will not cover you if the house collapses!

Colin Warburton is a qualified UK Mortgage and Home buildings insurance Broker and a Network Marketer. If you are looking for a Residual Income, Colin can show you how to get prospects to come to you. You haven't got the time to waste dealing with people who aren't interested in whatever you have to offer.

2 X 4 Wood Trim Around Window

A List Of Patio Window Coverings

Windows which are unpainted and which are not mounted with curtains or draperies appear boring and lifeless. You could also be seen by the people who just simply happen to pass by near your place.

Hence, you lose your privacy and you become more inclined to getting harassed. Then, the more that you are to be bugged by such concern when you talk about the patio window coverings.

Generally, the basic use of the window coverings are to provide a cover for the interior and then to basically boost the impression created by the decorations used inside.

However, do not misconstrue the fact that you could purchase any patio window covering that you spot at the department stores that you visit from time to time.

You need to think about many elements such as the size of the patio window, the color, design, pattern, and texture of the patio window covering to use, and a lot others. Your taste and preference matters when you choose the patio window coverings.

The following is a list of the most sought after and bestseller kinds of patio window coverings.

1. The blinds. There are generally four kinds of the blinds that you may use as patio window coverings. They are the aluminum, fabric, vinyl, and wood. The two basic constructions of the blinds are the vertical and the horizontal blinds.

The vertical blinds are perfectly utilized for the bay windows, patio doors, and for the corner windows. On the other hand, the horizontal blinds are nonetheless mounted on standard windows.

2. The curtains. These depend on the length that you desire and the color, design, and casement that would truly fit into the patio windows that need them.

3. The swags. These may be matched with the shades, shutters, blinds, and curtains.

4. The shutters. These are the louvers or solid panels that may be available for customization.

5. The shades. These are used for the purpose of blocking or filtering the light that comes into the room.

6. The draperies. They contribute to the formal touch that is endowed to the interior of the home.

7. The valances. These are the adornments that may be added to the layers of the patio window coverings.

These are just some of the choices that you may opt for when looking for the patio window coverings.

For tips on choosing window coverings, visit http://www.windowcoverings101.com

Plumbers - Get Free PR and Grow Your Profits

Most plumbers do not think they will be able to get their stories into the press and so do not bother trying to get any free PR. This is a mistake, PR is a very powerful method of marketing for free and any business can get a massive amount of free PR which would normally cost a serious amount of money if it was done through paid advertising.

PR actually lends a lot more credibility than traditional paid advertising because when your story is featured in the editorial of your local newspaper, TV or radio station it carries a lot more weight.

There are plenty of people who have turned their businesses around just through using PR. Just by sending a simple one page press release to their local media they got a lot of free publicity and interest in their business. Follow the strategy below as one way that you can try to get some free publicity:-

Promote yourself as an expert in your field and make sure all your local media knows about you.
Use the world around you as a backdrop for what you have to say. For instance, the winter is a time when we all need to keep warm but in the current economic climate where money is tight we want to spend as little as possible to do so. As you are a plumber you could write a one page press release about how you can help home owners keep warm and save money at the same time and include tips on insulation and getting the most from their central heating systems etc. You may need to spend a bit of time doing some research, but if you assure the public that you have some genuine information that will help them you will find it is easy to get some free publicity.

Your local media is always on the look out for fresh, exciting and unusual stories to use, so get your imagination working and come up with some interesting stories to get that free publicity that could seriously increase your business.

Plumbers discover very easy to implement marketing and internet marketing strategies to recession proof your business with this free E-Book from Marketing Man. Marketing Tips for Plumbers

Marketing Man has hundreds of Marketing Tips to help you recession proof your business. If you run a small business visit his website today to get instant free marketing tips to help you fight the credit crunch. Marketing Man

Window Header Framing Problems

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

New Versus Old Lumber - Structural Failure

During my 30 years of remodeling and building new homes. I have ran across quite a bit of structural framing failures. I find myself answering this question a lot when explaining to a homeowner about the structural failure I am repairing on their home, "Why Didn't They Use Better Lumber" or " Why Didn't They Use Larger Lumber." I really have a hard time answering these questions because I honestly don't know the answer.

However I can try to use some logic and reason to give these people an answer that seems to make sense to both of us. Why didn't they use better lumber, quite simply because, with most older homes that were built before the 1970s they actually do have better lumber. Now you're probably thinking how can these homes have better lumber when the lumber is old versus the new lumber used in a brand new house.

Most of the structural repairs I have made over the years has nothing to do with the lumber and whether it was new or old. A large number of these repairs were caused by neglect and poor maintenance.

The lumber in most older houses are from older growth trees. Some of these trees were extremely large and only the premium parts of the trees were used. The premium lumber is cut farthest away from the center of the tree. Now the larger the tree it makes sense that there will be more premium lumber.

A large majority of the newer lumber used in home construction comes from trees about 6 inches in diameter. Now you're probably wondering how can they cut a 2 x 8 piece of lumber out of a 6 inch tree. Of course they cannot, the larger lumber comes from larger trees.

Most 2 x 4's that are less than 8 foot long can be cut from these trees. This scrap or waste that comes from cutting these two by fours will now go into engineered building materials like particleboard, oriented strand board and engineered beams. Another name for an engineered been would be a paralam.

I hope you're starting to get the picture now when it comes to using new or old lumber. There are companies that are going into old logging rivers and retrieving old growth lumber. These were logs that sank to the bottom of the river's and were never retrieved because it was too costly.

The old growth lumber is quite expensive. Who's to say what problems we will happen in the future from the newer products created with modern day technology. When it comes to building houses it is not an exact science and as contractors we have been repairing the damage from poor engineering for years.

When I use the word poor engineering I am not pointing fingers at engineers. We now have more knowledge about home construction then we had years ago.

New versus old lumber, who wins the battle. Only time will tell.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Structural Repairs.

3 X 6 Mudsill For Shear Wall

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

3 Double Hung Windows In Rough

Do it Yourself Solar Panels - Simple Process to Cut Your Home Electric Bills

Our monthly electricity bill is one of the largest household expenses. We need electric power to run all our electrical equipment. While power demand is expected to rise, the cost of electricity will increase in the near future also. This is due to limited supply of oil needed to generate power by utility companies. One of the simplest ways we can take to reduce our power consumption is by using Do It Yourself Solar Panels. How does the procedure works? This article will shed some light of the science of a home solar power system.

Before you start any home construction project, you have to be well versed with hand tools and ample working space. To build your own home solar energy system, you have to construct a solar array on the roof. A solar array is made from a series of solar cells linked together. The function of the solar array is to collect the sun energy and convert it into electric power. To harness the solar power, the solar array is connected to a charge controller where electric current will be diverted into deep cycle batteries bank. The batteries will be used to store electric power to run our electrical appliances. Since a battery can only store Direct Current (DC), you will need an inverter to convert it to Alternate Current (AC). AC will be used to power our homes.

With proper planning, do it yourself solar panels have the potential to reduce our home electric power consumption. This can be done by slowly changing our home power demand to the solar energy system. With rising energy cost, any idea that can help us to save cost would be a blessing.

Want to know how you can build your own Home Solar Panels to reduce your electricity bill for under $300? If you are good with hand tools, start a Do It Yourself (DIY) project to construct a residential solar array to harness free energy from the sun. What you will need is a step by step instructional guide. Get a comprehensive Solar Power For Homes guide review at http://www.DIYSolarHomes.com/

Advantages of Framing With Steel Studs

I have heard all sorts of stories over the years of the advantages in framing with steel versus wood studs. One time I even heard you could build an entire house with the amount of recycled steel from a large automobile such as a Cadillac. I find this hard to believe unless you're building a very small home.

My personal favorite for framing with steel studs is that they are extremely straight. I have built nonbearing partition walls using 12 foot 3 1/2 inch wide steel studs and after the drywall you can lay an 8 foot level to check it for straightness on the wall with amazing results.

If you use 3 1/2 inch wide steel studs with 5/8 of an inch drywall you will get an extremely durable and sturdy wall. Framing was steel studs is common in office renovations or remodeling. Most of the steel stud framing is done via the drywall contractors.

Steel studs and termites do not mix. You'll never have to worry about these little buggers or other uninvited house pests damaging your walls.

Over the years I have heard stories that steel framed buildings are earthquake and fire proof. They might be more resistant to fire than wood but keep in mind when metal is hot enough it will bend and warp making it unusable.

When I hear people talking about a fireproof building built with metal framing components my first thought is all of the other materials used in building the house that are not fire resistant. Don't get a false illusion when buying a house framed with steel studs and think it is 100% fire proof.

As far as steel framed buildings being earthquake proof this is another story. I really can't comment too much on earthquake damage to a steel building. The problem with earthquakes is they seem to create fires. So even if you're building does survive an earthquake it could get damaged by a fire in the area.

I have framed more wood homes than steel homes over the years and my steel stud construction is limited to nonbearing partition walls usually located in office buildings. I love framing with metal because of its light weight and ease of construction.

I still love framing with wood. There is something about what framing that I have always loved and always will.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as

well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Framing Ideas

Feng Shui Your Bedroom

Your bedroom has an effect on the way you sleep, and this is a very important factor in staying healthy, happy and accumulating wealth. There isn't just one element to consider when planning your life with abundance; you need to take everything into account, including the way you revitalize yourself. Your bed should be comfortable, and the energy should flow smoothly throughout the room. You should not have anything under the bed, so that energy can circulate properly.

The bedroom should be painted a soft color that suits your energy so you will rest peacefully. A bedroom should never be painted red. Red is an energizing color and you will not get the proper rest if you sleep in a red room. Fresh air should always be circulating through your bedroom and also through the rest of the house. If you live in an apartment building as I do, and do not have much circulation flowing throughout, get a small floor Vornado fan and place it near a window. I recommend

the Vornado fan because it is the only one I have found that is quiet and doesn't blow too hard. It is the quietest fan I have found on the market. Most fans, even on the lowest speed, tend to move too fast. Ceiling fans turned low are also a good way to circulate energy. Ceiling fans should not be placed directly over your bed. Your bedroom should never have a mirror that faces the bed, as it interferes with restful sleep. Mirrors should not be placed behind your bed, at your feet or by the side of the bed. It is an old Chinese belief that your spirit leaves the body and rises as you begin to sleep, but becomes frightened when it sees itself in a mirror. It then rushes back inside the body with the result that you never get a good night's sleep.

The Chinese also believe that a white coverlet is unhealthy because it is the color of the shroud that covers the dead. It is also considered unhealthy for your feet to face the door, because that is how they remove dead bodies from a room. There is a saying in Feng Shui that when you sleep with your feet facing the door you will never stay at home. You will find that you will want to be on the go all the time and never feel relaxed when you are home. You will be on the go constantly. Ceiling beams in a bedroom are quite unhealthy as they disturb the flow of ch'i. They should be avoided in all the rooms but especially the bedroom. Have them covered if they are open. They block the flow for energy to circulate. They also cause financial problems. Wall beams in corners of the room have the same effect. Green plants placed by the side of the wall beams help deflect some of the negative energy, as will a wind chime hung from the ceiling in front of the beam.

Your bed is one of the most important things you have and should be replaced every time you move. It should also be replaced under the following conditions for the fresh energy a new mattress brings:

If you have had your bed for a long period of time, perhaps five years or more, you should replace it.

If you have a bed where other people slept before you.

If you or your partner have been seriously ill,your bed should be replaced with a new one.

Visit http://www.myfengshuilife.com for more great Feng Shui tips and information.

Home Garage Books

Stair Building Books

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

What You Need to Know About Vinyl Shake Siding

Vinyl Cedar Shake Sidings have some obvious benefits. Otherwise, they would not be preferred over the conventional wooden sidings, which have been serving a lot of home improvement activities for some time now.

With benefits like low maintenance costs and excellent longevity, you would find Vinyl Cedar Shake Sidings increasingly finding favor with a lot of home owners. If you wish to be using sidings for your home or business space, then you should definitely consider some top quality products, for example The Foundry.

Variations in the exterior and the tone coupled with splits along the granular lines are typically some characteristics of cedar vinyl shake siding.

Austere and Simple - Two words for Cedar Vinyl Shake Siding

These sidings are known to grant a very good, old and a rustic look to your home. Though at times, some people may find this a touch too expensive, especially on the lines of some wood shake sidings, but the fact that these sidings allow so many benefits to people make it an excellent prospect to be used in most homes. With that being said, polypropylene shakes allow an extra touch of finesse to the wood shakes and also helps in reducing maintenance costs.

Homes that have these sidings definitely look a class apart. Ask people who stay in the home, and they would tell you that their homes are now calmer and much more pleasing to stay in. In earlier days, wood shakes with cedar finishing used to be done with the rather arduous method of hand sewing. Of course, with time, this has been replaced with much sophisticated techniques to give cedar sidings.

More about Vinyl Cedar Shake Siding

For a moment, think like a termite (Not a creature you would want to think of)! If you really were a termite and wished to have a family, trust you would head for the wooden places to establish your base. The good news with Cedar Shake Sidings is that they do not encourage termites. Bad news for you if you are thinking like a termite as yet!

Cedar shakes that are hand-hewn can be good, but not many people like its appearance. If that really is the case, you should go for vinyl cedar shake sidings, which anyways will impress you with their style and low maintenance costs.

Jim Warren is a consumer advocate who enjoys writing about the right way to purchase and take care of Vinyl Log Siding. Be sure to visit http://vinyllogsidingreport.com for more important vinyl siding tips and resources.

Home Garage Books

Technologies of Home Improvement - Siding and Chemical Treatment

The modern homeowner has a wealth of opportunities available to them to improve and refine their homes. In the past, it was often believed that the homeowner must take responsibility for every aspect of their home through a hands-on, attentive, and time consuming process of detail adjustment, surveillance, adaptation, and analysis.

While it is true that the modern homeowner has not been completely absolved of the necessities of care and commitment, recent technological advancements, specifically in the fields of lawn care and home siding, have been able to provide unique opportunities and advantages for homeowners from the 20th century. However, with these advantages come unique problems as well. One should examine the technologies of James Hardie siding and environmentally friendly pesticides to consider their strengths and weaknesses.

James Hardie siding is a relatively new invention that claims to be fire resistant and affordable. We can defer the need to examine the affordability of this product momentarily so that we can consider the advantages of fire-proof home siding. This may be an instance of a new technological advancement that solved a problem that few, if any homeowners even knew that they had.

It is in fact the case that traditional home siding is flammable and is often the cause of serious fire damage during a home crisis. While infrequent, when a house fire spreads to the outside siding of a residence, it can exacerbate the damage and spread around the house at a moment's notice. On this point, James Hardie siding is a clear advantage as it is inflammable and will not put the homeowner at risk of exterior home damage.

The second technology to consider is environmentally friendly pesticide. Many homeowners are been keenly aware of the environmental damage that is caused by pesticides and chemical treatments. In recent years, however, new, environmentally friendly products have been released to aid in the control of your lawn's pests without damaging the environment at large.

Likewise, this technology is a clear advancement over prior treatments, but it should not be considered the solution to all chemical problems- even environmentally friendly can be harmful if used too frequently or before rainstorms.

Both technologies have been demonstrated to be improvements over past products. The remaining issue is the affordability of both products. It cannot be said with any degree of certainty that an individual should purchase these new technologies. In a time of economic crisis it is too much to presume to know the individual financial situations of homeowners. It is up to the homeowner to decide to budget and analyze their own financial circumstances to see if they can afford the new technologies of home ownership.

Mr. Oliver is a marketing agent of Preferred Siding. The siding contractor provides James Hardie and Hardiplank Siding throughout the Northern Virginia area. For more information on their cosmetic surgery Richmond Virginia please visit their website.

Preventing Exterior Fires to Your Home

It is important to consider the exterior of your home as a hazard arean and should be a part of your property protection plan. Don't overlook the patio, back yard, roof and garden when making your inspection for fire hazards. These areas are just as important as the interior of your home, especially since there are other factors that can affect a fire's behavior.

Roof Safety

There are many homes lost due to the roof catching fire. If you are building or replacing the roof, ask your contractor about using non-combustible or fire resistant roofing materials, such as Class A shingles, metal, or tiles. If roof of your home is not fire retardant, it can be treated with fire retardant processes to reduce its flammability.

Yard Safety Cleaning

If you have a wood pile in your yard, following some basic fire safety rules can prevent it from catching fire. Always remember that the way you maintain the wood pile can reduce the occurrence, size, and intensity of a fire. Make a safety parimeter around the wood with about 30 feet of clearance. A fresh, green lawn makes a good safety parimeter, as long as it is clear of leaves, twigs, and other fuel for a fire.

When it comes to plants and trees, some are more fire resistant than others. For example, hardwood trees are more fire resistant than pine trees. Remove dry leaves, dead limbs, twigs and debris as they can turn a small fire into a large one. By thinning out your trees to keep a fifteen foot distance between tree crowns you can reduce the chance of fire spreading from tree to tree.

Tree limbs and dead branches should be removed from about 6 to 10 feet off the ground to prevent fires from spreading from the ground to the trees. Trees should be well maintained and pruned near buildings, stovepipes and chimneys.

Outdoor Grill

The best way to keep your outdoor gas grill in good and safe condition is to keep it clean of dirt, grease, and debris. Periodically check the case line for cracks. Propane or natural gas leaking from a cracked hose can be extremely hazardous.

Leo Nov is an editorial staff member of RestorationSOS, to learn more about fire damage and fire and smoke damage cleanup visit RestorationSOS.com or call 1-877-767-2407.

Deck Building Books

The Pleasure of Fireplaces

Winter is closing in, soon the days will be shorter and the nights cooler and slowly we will spend more time indoors and in the comfort of our houses, this is a perfect time to start and think about having your own fireplace. The fireplace can be used as a major home improvement and upgrade opportunity, it can be used in the summer, but not for heating, as an original spot to hold flowers or plants, and serve as a main point of reference in the house.

In winter a fireplace is of great help, it keeps large rooms warm, naturally depending on the size of the fireplace, and gives the whole space a very special feeling, especially on cold winter nights. Fireplaces can also be used as a main point in the living room, around which the family members can gather and discuss issues or their daily activities, loving couples can spend hours in front of the fire and even fall asleep beside the fireplace.

There are so many different kinds of fireplaces on the market today that it is almost sure that anyone can find a fireplace that suits his or her needs, from the classic stone fireplaces, heavy and majestic who rule the room with their large bricks and fire combination to the more modern iron fireplaces that have many other features added to them and can be used for many different tasks, there is a fireplace out there for anyone who considers having one in their house.

Looking for a fireplace is always nice, you can start the search on the internet since today a lot of manufacturers add a lot of information about the fireplace, its design and build, what is needed to maintain it and how it works as well as many other specifics you will be interested in, this should give you a nice overall look at the market, its products and prices, the next thing you do should be to head out to some shops and look at different fireplaces, talk to some people and see what is the kind of material and design you like.

Adding a fireplace to a living room can make a real significant difference in the way the room will look, and you should think about that when looking for a fireplace, the first thing you should remember is that the fireplace should not stand out from the other things in the room, it should fit in with the rest of the things you currently have, the colors and the materials in the space in which you are going to place it in.

Once you get the fireplace you were dreaming about, you should start understanding what are the maintenance steps that you need to take to make sure that the fireplace is secure and safe, and that it will also work well for a long time, maintenance is key in all house appliances and in this case the fireplace is no exception. Enjoy the winter and enjoy your fireplace, may it keep you warm and happy during the cold winter nights.

Daniel Roshard is an interior designer fascinated by outdoor architecture, currently studying public parks and outdoor design. Daniel writes articles about Fireplaces and indoor heating solutions. Read Daniel's Fireplaces searching and buying tips and advice.

Big or Small Your Kitchen Remodel Can Make A Big Difference

Many people will agree that there is really no reason for some people to have a large kitchen. In fact there are many single people who go through their whole lives with a tiny kitchen that suits him just fine. But recent realizations eatery modeling and revitalization of spaces has proved that small kitchen spaces cleverly remodeled will open up to a much larger space. It is not even opinion anymore but it is fact that with the right amount of remodel any kitchen can shine.

Garner Opinion

Think about your own kitchen and how it is laid out. If you have one of the three basic layout designs for small kitchen you will understand that it is either a straight, U-shaped, or L-shaped. It probably does that say that the U-shaped and the straight differ in the layout of the back wall and the L-shaped has a countertop. While the U-shaped kitchen may have more things outside of it this is not really the point as we are trying to remodel your kitchen area and make the most of what little space you do have. Ideally your kitchen would be as user-friendly as it needed to be so that you are able to do your business or kitchen and you are able to exist peacefully with it.

So long as your countertop space has a space that you need it should be fine. However there are probably times when you're cooking and you want to have more space to prepare the food or do whatever other businesses you do in the kitchen; this is the point of remodel. As many have proven in the past a kitchen remodel on a tiny kitchen is peerless in the difference it makes in the lives of the people who are the recipient of the remodel.

Peerless and In Place

You should have a good idea of where everything goes in your kitchen and this is one of the biggest considerations eight to make. Whether you're talking about having your utensils do you buy your prep area or whether you need to have a mixer in a certain spot, these all need to be addressed before you make any final decisions on what type of a remodel it is that you want to do.

If your kitchen is not so tiny that you have the space to do a number of other things like eat or grab breakfast that you should make area for this as well. Even if it's just a tiny coffee Station to prepare coffee in the morning and have a bagel while you read the paper; these are all important components to your kitchen area.

Acceptance of the status quo is not anything you should never have to be forced to do so make sure your kitchen remodel suits your needs and works for what it is you are trying to do in your kitchen, big or small.

Guy Morris's reports are found on numerous online publications with reference to wall mount faucet and kitchen faucet. His contributions on wall mount faucets can be encountered on his webpage and also different web sites.

Plaster And Drywall Cracks